<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="http://webhosts.cr.usgs.gov/mod/FGDC_Plus.xsl"?><metadata>
  <idinfo>
    <citation>
      <citeinfo>
        <origin>U.S. Geological Survey</origin>
        <pubdate>20120604</pubdate>
        <title>US Topo 7.5-minute map for Block Island, RI</title>
        <geoform>map, raster digital data</geoform>
        <pubinfo>
          <pubplace>Rolla, MO and Denver, CO</pubplace>
          <publish>USGS - National Geospatial Technical Operations Center (NGTOC)</publish>
        </pubinfo>
      </citeinfo>
    </citation>
    <descript>
      <abstract>US Topo map converted from GeoPDF/Geospatial PDF to GeoTIFF. Geospatial data included in each map varies, but may include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features. US Topo GeoPDF maps were designed specifically for the capability to turn individual layers on and off. GeoTIFFs do not provide for that capability and thus, certain layers will not be available on the GeoTIFFs that are available in the PDFs. The selection of layers to show on the GeoTIFFs was based solely on cartographic design, and so it is recommended that the PDF be downloaded if there is interest in the full set of layers. For each PDF published since October 2013, two GeoTIFFs are available. PDF maps published prior to that date are not available in GeoTIFF. Both GeoTIFFs exclude shaded relief, woodland, and several Federal Administrative Land boundary layers (National Cemetery, Department of Defense, Bureau of Land Management, Fish and Wildlife and Native Lands) specifically for reasons of clarity based upon the cartographic design. One of the GeoTIFFs has the orthoimage layer turned off, and the other has the orthoimage turned on. In the latter case, contours and wetlands layers also are turned off, again for cartographic clarity. Data layers not included in the GeoTIFFs can be added to the map depiction in a GIS by downloading the associated file from The National Map (TNM), or by linking to a map service. For example, the woodland polygon data layer is available for download. This data was derived and generalized from the National Land Cover Dataset (NLCD) which is also available as a map service from TNM provide a woodland representation.</abstract>
      <purpose>This map depicts geographic features on the surface of the earth. It is a general purpose map for users who are not GIS experts. One intended purpose is to support emergency response at all levels of government. The geospatial data in this map are from selected National Map data holdings and other government sources.</purpose>
      <supplinf>GNIS Cell ID = 4398</supplinf>
    </descript>
    <timeperd>
      <timeinfo>
        <rngdates>
          <begdate>1972</begdate>
          <enddate>2012</enddate>
        </rngdates>
      </timeinfo>
      <current>publication date</current>
    </timeperd>
    <status>
      <progress>Complete</progress>
      <update>Irregular</update>
    </status>
    <spdom>
      <bounding>
        <westbc>-71.625</westbc>
        <eastbc>-71.5</eastbc>
        <northbc>41.25</northbc>
        <southbc>41.125</southbc>
      </bounding>
    </spdom>
    <keywords>
      <theme>
        <themekt>ISO 19115 Topic Category</themekt>
        <themekey>imageryBaseMapsEarthCover</themekey>
        <themekey>EarthCover</themekey>
        <themekey>Imagery and Base Maps</themekey>
      </theme>
      <theme>
        <themekt>None</themekt>
        <themekey>topographic</themekey>
        <themekey>transportation</themekey>
        <themekey>structures</themekey>
        <themekey>geographic names</themekey>
        <themekey>hydrography</themekey>
        <themekey>orthoimage</themekey>
        <themekey>contour</themekey>
        <themekey>U.S. National Grid</themekey>
      </theme>
      <place>
        <placekt>Geographic Names Information System</placekt>
        <placekey>US</placekey>
        <placekey>United States</placekey>
        <placekey>Rhode Island</placekey>
        <placekey>Washington</placekey>
      </place>
      <place>
        <placekt>None</placekt>
        <placekey>Block Island, RI</placekey>
      </place>
    </keywords>
    <accconst>None</accconst>
    <useconst>None. However, users should be aware that temporal changes may have occurred since this data set was collected and that some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Acknowledgment of the U.S. Geological Survey would be appreciated for products derived from these data.</useconst>
  </idinfo>
  <dataqual>
    <attracc>
      <attraccr>Cartographic content is derived from USGS national geospatial databases. The data is owned and hosted by the USGS, but does not preclude using data sources owned and hosted by other organizations, provided that these sources have been approved by the USGS data program.</attraccr>
    </attracc>
    <logic>Two GeoTIFF maps converted from each US Topo layered PDF map published since October 2013.</logic>
    <complete>Feature content is extracted from the USGS national geospatial databases. These data are intended to be cartographically complete at the scales that the map is produced, 1:24,000 scale in the conterminous 48 states and Hawaii, 1:25,000 scale in Alaska, and 1:20,000 scale in Puerto Rico and the Virgin Islands.</complete>
    <posacc>
      <horizpa>
        <horizpar>US Topo map products in GeoPDF are compiled to meet National Map Accuracy Standards (NMAS). NMAS horizontal accuracy requires that at least 90 percent of well-defined points tested are within 0.02 inch of the true position. In this product, the projection line, grids, and orthoimage are believed to meet NMAS. Positional accuracy of the other data layers is less controllable because of diversity of data sources, and may not meet NMAS. The digital GeoTIFF version of the map was created with a methodology that preserves, but does not exceed, the accuracy of the original GeoPDF/Geospatial PDF map.</horizpar>
      </horizpa>
      <vertacc>
        <vertaccr>The accuracy of the National Elevation Dataset (NED) is inherited from the source digital elevation models (DEMs). The overall absolute vertical accuracy expressed as the root mean square error (RMSE) is 2.44 meters. The measured vertical RMSE was converted to equivalent NMAS and NSSDA expressions. The accuracy is expressed in terms of the National Map Accuracy Standards (NMAS), which use a 90 percent confidence interval, and in terms of the National Standard for Spatial Data Accuracy (NSSDA), which uses a 95 percent confidence interval. </vertaccr>
      </vertacc>
    </posacc>
    <lineage>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>National Agriculture Image Program (NAIP) administered by the Aerial Photography Field Office (APFO) for the United States Department of Agriculture. </origin>
            <pubdate>20120604</pubdate>
            <title>Orthoimagery</title>
            <geoform>Raster digital data or Digital Orthorectified Image or NAIP Digital Ortho Photo Image</geoform>
            <othercit>An orthorectified image is a layer in every product and is provided by the USDA-FSA-APFO from the National Agriculture Image Program (NAIP). This offers the USGS a nationally consistent image product, normally with a one meter resolution in natural color.</othercit>
            <onlink>http://www.fsa.usda.gov/</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>20100728</begdate>
              <enddate>20100728</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Imagery</srccitea>
        <srccontr>Image</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>TomTom</origin>
            <pubdate>20120604</pubdate>
            <title>Transportation, commercial roads</title>
            <geoform>vector digital data</geoform>
            <othercit>TomTom Multinet dataset, licensed to the USGS for use in US Topo (1:24,000-scale topographic maps in GeoPDF format). TomTom retains copyright to these data. The USGS license allows these data to be freely used and redistributed in US Topo instances, provided this copyright notice is retained. TomTom data are filtered and may be generalized by USGS for protrayal in this product. TomTom roads are not mixed with other road data sources within a 7.5-minute quadrangle, with the exception of U.S. Forest Service lands, where public domain data from the Forest Service are used.</othercit>
            <onlink>http://www.tomtom.com</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2006</begdate>
              <enddate>2011</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Roads - TomTom</srccitea>
        <srccontr>Road centerlines, route numbers, road classification, street names</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>USFS</origin>
            <pubdate>20120604</pubdate>
            <title>Transportation, USFS FSTopo roads</title>
            <geoform>vector digital data</geoform>
            <othercit>The FSTopo database was originally populated with Cartographic Feature File (CFF) data. CFF data were derived from the standard Forest Service Primary Base Series (PBS) or Single Edition Series (SES) map as part of the Forest Service National Geographic Information System Plan. PBS and SES maps were developed from the U.S. Geological Survey 1:24,000-scale, 7.5-minute topographic map series, with enhancements and regular revisions to satisfy Forest Service needs. Except in Alaska, where 1:63,360-scale maps are used, the original USGS 1:24,000-scale source maps were constructed to meet National Map Accuracy Standards, which require that 90 percent of all well-defined features shown on the map are within .02 inches of their true location. CFF data were collected using methods and the best technologies available to ensure that digitized elements were captured within .003 inches of corresponding elements shown on source maps. The USDA Geospatial Service and Technology Center (GSTC) uses the same data collection accuracy standard for additions and revisions to the data. Only maps in USDA Forest Service areas will contain USDA Forest roads.</othercit>
            <onlink>http://www.fs.fed.us/gstc/</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2009</begdate>
              <enddate>2009</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Roads - USFS FSTopo</srccitea>
        <srccontr>Road centerlines, route numbers, road classification, street names</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>Federal Aviation Administration</origin>
            <pubdate>20120604</pubdate>
            <title>Airports</title>
            <geoform>vector digital data</geoform>
            <othercit>Runway outlines are for Federal Aviation Administration (FAA)-recognized public and private airports in the United States. The 2008 FAA runway coordinates, FAA_RunwayID, and Airport Location Codes were used by the USGS to digitize runway outlines on recent NAIP orthoimagery. The digitized data were inspected for accuracy and completeness then loaded into the USGS national transportation database.</othercit>
            <onlink>http://www.faa.gov</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2008</begdate>
              <enddate>2010</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Transportation - Airports</srccitea>
        <srccontr>runways</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>State and Federal Partners</origin>
            <pubdate>20120604</pubdate>
            <title>Fire Stations</title>
            <geoform>vector digital data</geoform>
            <othercit>Any location where fire fighters are stationed or based out of, or where equipment that such personnel use in carrying out their jobs is stored for ready use. Fire fighting training academies or locations are included. Fire Departments which are Mobile Units and not having a permanent location, are included, in which case their location has been depicted at the city/town hall or at the center of their service area if a city/town hall does not exist. This dataset includes those locations primarily engaged in forest or grasslands fire fighting, including fire lookout towers if the towers are in current use for fire protection purposes.  This dataset includes both private and governmental entities.  Locations that serve only administrative function are excluded. Locations serving both administrative and operational functions are included.</othercit>
            <onlink>http://nationalmap.usgs.gov</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2006</begdate>
              <enddate>2010</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>ground condition</srccurr>
        </srctime>
        <srccitea>Structures - Fire Stations</srccitea>
        <srccontr></srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>State and Federal Partners</origin>
            <pubdate>20120604</pubdate>
            <title>Hospitals</title>
            <geoform>vector digital data</geoform>
            <othercit>Includes general medical and surgical hospitals, psychiatric, substance abuse and specialty hospitals such as Children's hospitals, cancer, maternity and rehabilitation hospitals. Other types of hospitals are included if represented in data sets provided by various partners for this compilation. Hospitals operated by the US Department of Veterans Affairs are included. Nursing homes, long term care facilities and Urgent Care facilities are generally excluded. Locations that are administrative offices only are excluded from the dataset.</othercit>
            <onlink>http://nationalmap.usgs.gov</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2006</begdate>
              <enddate>2011</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>ground condition</srccurr>
        </srctime>
        <srccitea>Structures - Hospitals</srccitea>
        <srccontr></srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Geological Survey</origin>
            <pubdate>20120604</pubdate>
            <title>Geographic Names Information System (GNIS)</title>
            <geoform>vector digital data</geoform>
            <othercit>The National Geographic Names Database is a part of the Geographic Names Information System (GNIS) and represents the primary source for identifying official names. The system is maintained by the U.S. Geological Survey in cooperation with the U.S. Board of Geographic Names.</othercit>
            <onlink>http://geonames.usgs.gov/</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2011</begdate>
              <enddate>2011</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Geographic Names</srccitea>
        <srccontr>Geographic feature names</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Geological Survey in cooperation with U.S. Environmental Protection Agency, USDA Forest Service, and other Federal, State and local partners. National Hydrography Dataset is a component of a comprehensive base geospatial data model.</origin>
            <pubdate>20120604</pubdate>
            <title>Hydrography</title>
            <geoform>vector digital data</geoform>
            <othercit>The National Hydrography Dataset (NHD) is a feature-based database that interconnects and uniquely identifies the stream segments or reaches that make up the nation's surface water drainage system. The high-resolution NHD was originally created using 1:24,000-scale data. State and Local Stewards are improving the data by incorporating local updates based on more current and more accurate source data. Water features in the real world are relatively dynamic and the differences at the time of data collection mean that water features may not register exactly to other layers. The hydrographic feature names contained in and displayed by the NHD are extracted and validated from the Geographic Names Information System (GNIS). Spatial objects may be filtered or generalized to achieve a 1:24,000-scale representation.</othercit>
            <onlink>http://nhd.usgs.gov/</onlink>
            <onlink>http://nhd.usgs.gov/gnis.html</onlink>
            <onlink>http://nhdgeo.usgs.gov/metadata/nhd_high.htm</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>20100728</begdate>
              <enddate>20100728</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Hydrography</srccitea>
        <srccontr>Hydrography features and feature names</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>International Boundary Commission</origin>
            <pubdate>20120604</pubdate>
            <title>U.S.-Canada National Boundary</title>
            <othercit>The international boundary dataset between Canada and the United States was provided by Maine Office of Geographic Information Systems (MEGIS), University of New Hampshire, Vermont Center for Geographic Information, Inc (VCGI). The dataset was collected from multiple source agencies such as the U.S. Geological Survey, U.S. Department of Commerce, Bureau of Census, Bureau of Parks and Lands, Coastal Island Registry (CIREG) and various state agencies. The data and attribution accuracy was tested by manual comparison of the source with hard copy printouts and/or symbolized display of digital files and corrected by each state GIS department for use at a scale not greater than 1:24,000.</othercit>
            <onlink>http://www.internationalboundarycommission.org/</onlink>
            <onlink>http://www.internationalboundarycommission.org/products.html#nad83</onlink>
          </citeinfo>
        </srccite>
        <typesrc>point digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2006</begdate>
              <enddate>2006</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>U.S. / Canada International Boundary</srccitea>
        <srccontr>International Boundary between Canada and the United States</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Geological Survey, U.S. Department of Agriculture, and the Instituto Nacional de Estadística y Geografía of Mexico.</origin>
            <pubdate>20120604</pubdate>
            <title>U.S.-Mexico National Boundary</title>
            <othercit>The international boundary between Mexico and the United States, defined as a joint venture between the U.S. Department of Agriculture (USDA) and the Instituto Nacional de Estadística y Geografía of Mexico (INEGI), resulted in an unofficial United States-Mexico boundary dataset that was further enhanced by the U.S. Geological Survey's Border Environmental Health Initiative (BEHI). With the data frame scale set to 1:5,000 in ArcMap, the center of the Rio Grande/Río Bravo was digitized using the NAIP 2004 Imagery. In areas with dense stands of salt cedar (bounding box = UL -104.714 30.038, UR -104.664 30.037, LR -104.666 29.933, LL -104.717 29.934; NAD83), the center of the channel was difficult, and sometimes impossible, to easily determine. To determine the location of the boundary, the GIS analyst compared the location of the line in the INEGI 1:250K Limite feature class with the NAIP 2004 Imagery and adjusted the boundary to the image, thus, the delineation of the international boundary is less certain in these areas. The remaining part of the border was extracted from the INEGI 1:250K Limite feature class and appended to the line feature class created along the Rio Grande/Río Bravo. The U.S. Geological Survey reviewed the original USDA data against 2007 NAIP imagery and further edited 9 line segments in the Rio Grande areas to conform to National Map Accuracy Standards.</othercit>
            <onlink>http://borderhealth.cr.usgs.gov/projectindex.html</onlink>
            <onlink>http://extract.cr.usgs.gov/BorderHealth/Boundaries/Int_Boundary/International_Boundary_Shapefile.zip</onlink>
          </citeinfo>
        </srccite>
        <typesrc>vector digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>1972</begdate>
              <enddate>2006</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>U.S. / Mexico International Boundary</srccitea>
        <srccontr>International Boundary between Mexico and the United States</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Department of Agriculture (USDA) Forest Service - Washington Office Automated Lands Program (ALP).</origin>
            <pubdate>20120604</pubdate>
            <title>USDA Forest Service Boundary</title>
            <othercit>The forest service boundaries defined by the USDA Forest Service encompassing the National Forest System (NFS) lands within the original proclaimed National Forests, along with lands added to the NFS which have taken on the status of 'reserved from the public domain' under the General Exchange Act. The following area types are included: National Forest, Experimental Area, Experimental Forest, Experimental Range, Land Utilization Project, National Grassland, Purchase Unit, and Special Management Area. The nationwide Proclaimed Forest dataset was created by the USDA Forest Service, Washington Office Automated Lands Program (ALP) staff from collected source data created by the Regional Offices. Only maps in USDA Forest Service areas will contain USDA Forest boundaries.</othercit>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>vector digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2009</begdate>
              <enddate>2009</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>USDA Forest Service Boundaries</srccitea>
        <srccontr>National Forest Service Boundaries</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Census Bureau</origin>
            <pubdate>20120604</pubdate>
            <title>State and Equivalent Boundary</title>
            <othercit>The Census Bureau collects boundaries from state and county governments through the Boundary and Annexation Survey (BAS, http://www.census.gov/geo/www/bas/bashome.html), and publishes the results as TIGER files.  The USGS uses the TIGER data without editing or alteration for US Topo.</othercit>
            <onlink>http://www.census.gov/geo/www/tiger/index.html</onlink>
            <onlink>ftp://ftp2.census.gov/geo/tiger/TIGER2010/STATE/2010/</onlink>
          </citeinfo>
        </srccite>
        <typesrc>vector digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2010</begdate>
              <enddate>2010</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>State Boundaries</srccitea>
        <srccontr>State and Equivalent Boundary</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Census Bureau</origin>
            <pubdate>20120604</pubdate>
            <title>County and Equivalent Boundary</title>
            <othercit>The Census Bureau collects boundaries from state and county governments through the Boundary and Annexation Survey (BAS), and publishes the results as TIGER files.  The USGS uses Census TIGER data without editing or alteration for US Topo.</othercit>
            <onlink>http://www.census.gov/geo/www/tiger/index.html</onlink>
            <onlink>ftp://ftp2.census.gov/geo/tiger/TIGER2010/COUNTY/2010/</onlink>
            <onlink>http://www.census.gov/geo/www/bas/bashome.html</onlink>
          </citeinfo>
        </srccite>
        <typesrc>vector digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2010</begdate>
              <enddate>2010</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>County Boundaries</srccitea>
        <srccontr>County and Equivalent Boundary</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Dept. of Interior, Bureau of Land Management, Division of Support Services, Branch of Information Resource Management</origin>
            <pubdate>20120604</pubdate>
            <title>Public Land Survey System</title>
            <geoform>vector digital data</geoform>
            <othercit>Section boundaries were generated from geodetic latitude and longitude coordinate pairs as recorded on BLM's official protraction diagrams of the state of Alaska. The SDMS_PROD protraction tables were modified to include pro_pt83, section83, and township83. The latitude and longitude values in the pro_pt83 table were transformed from geographic NAD27 coordinates to geographic NAD83 coordinates using NADCON for Alaska. The Informix Section83 table is a spatially-enabled table that contains all of the protraction information for each of the 655,483 sections. Section shapes are stored as NAD83 geographic multipolygons. Each section was individually constructed from NAD83 geographic pro_pt (Protracted Point) table and is fully densified by including all township/section offset corners from adjacent township/sections.</othercit>
            <onlink>http://sdms.ak.blm.gov/sdms/data_protracted_grid_gis.html</onlink>
          </citeinfo>
        </srccite>
        <srcscale>not applicable</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>Not Applicable</begdate>
              <enddate>Not Applicable</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Public Land Survey System - BLM</srccitea>
        <srccontr>Townships and ranges, sections</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>USGS - National Elevation Dataset is a component of a comprehensive base geospatial data model.</origin>
            <pubdate>20120604</pubdate>
            <title>Hypsography</title>
            <geoform>Vector digital data</geoform>
            <othercit>This contour featureclass was generated from the 1/3 arc-second version of the National Elevation Dataset (NED). The intended viewing scale for these features is 1:24,000. The contours are derived from a filtered elevation raster to achieve smoother arcs. The NED data were modified by the National Hydrography Dataset (NHD) flow lines and water bodies to facilitate improved integration between the hypsography and hydrography on USGS map products. These contours were generated primarily for use as a layer in GeoPDFs created in the US Topo digital mapping program. The raster data source of contours is the National Elevation Dataset (NED) 1/3 arc-second layer. The 1/3 arc-second NED contains resampled data from the 1/9 arc-second layer of NED. Secondary datasets include the high resolution flow lines, water bodies, and areas from the National Hydrography Dataset (NHD). The NHD layers are used in hydro-enforcement of the DEM prior to contour generation. The goals of the hydro-enforcement are to prevent contour lines from extending over the surface of water bodies and to align the contour reentrants with the NHD single-line streams. The NED raster cells are converted to points. Those points, along with the NHD flow lines are input into an interpolation tool to create a new surface. The NHD water bodies and areas are preprocessed to attach the minimum and maximum elevation to each polygon. From these precalculated values, an appropriate value is calculated by which to raise the elevation cells under the NHD polygons. The NHD polygons are then converted into rasters, which in turn will be used to generate a mosaic that includes the new raster surface. The mosaic is filtered to provide smoother contour lines. Contours are generated and depression and index contours are identified. There is no guarantee or warranty concerning the accuracy of the data. Users should be aware that temporal changes may have occurred since these data were collected and generated and that some parts of these data may no longer represent actual surface conditions. Hydro-enforcement and generalization can also significantly alter the spatial characteristics of the contours. Users should not use these data for critical applications without a full awareness of its limitations.</othercit>
            <onlink>http://ned.usgs.gov/</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>20120201</begdate>
              <enddate>20120201</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Hypsography</srccitea>
        <srccontr>Contours</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Geological Survey</origin>
            <pubdate>20120604</pubdate>
            <title>Land Cover - Woodland</title>
            <geoform>Vector digital data</geoform>
            <othercit>The Woodland is a derivative land cover product created using six national map layers: three National Land Cover Database (NLCD) 2001 raster layers (Tree Canopy, Imperviousness, and Land Cover);  and three  vector layers (National Hydrography Dataset,  Transportation Roads, and Transportation Airports). The process begins with masking the NLCD 2001 Canopy Data with NLCD 2001 Imperviousness V1 (values from 1-100), and Land Cover V1 (value 11 = Open Water).  The resulting raster data with canopy values of 20 and greater are converted to woodland vector polygons and smoothed via the Paek Algorithm.  The woodland polygons are masked with buffered Transportation and Hydrography (NHD Areas and NHD Waterbodies excluding Swamp/Marsh).  The resulting polygons are checked for scale appropriate size (minimum size of one acre), and the small woodland polygons as well as small clearings within the woodland polygons are deleted.</othercit>
            <onlink>http://nationalmap.usgs.gov</onlink>
          </citeinfo>
        </srccite>
        <srcscale>24000</srcscale>
        <typesrc>digital data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>2001</begdate>
              <enddate>2011</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Land Cover - Woodland</srccitea>
        <srccontr>National Landcover Dataset; National Hydrography Dataset; National Transportation Dataset</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>U.S. Geological Survey</origin>
            <pubdate>20120604</pubdate>
            <title>Grids and Coordinate System</title>
            <othercit>U.S. National Grid, UTM grid, and State Plane Coordinate System values are displayed along the map projection.  State Plane Coordinate System State and Zone values are abbreviated per Appendix A in the following document: Stem, J.E., 1990, 'State Plane Coordinate System of 1983', NOAA Manual NOS NGS 5, available at http://www.ngs.noaa.gov/PUBS_LIB/ManualNOSNGS5.pdf.</othercit>
          </citeinfo>
        </srccite>
        <typesrc>raster data</typesrc>
        <srctime>
          <timeinfo>
            <rngdates>
              <begdate>Not Applicable</begdate>
              <enddate>Not Applicable</enddate>
            </rngdates>
          </timeinfo>
          <srccurr>publication date</srccurr>
        </srctime>
        <srccitea>Grids and Coordinate Systems</srccitea>
        <srccontr>2.5-minute geographic ticks, U.S. National Grid, UTM grid, State Plane Coordinate System ticks.</srccontr>
      </srcinfo>
      <procstep>
        <procdesc>All geospatial content is taken from national geospatial databases under the stewardship of USGS data programs. The NAIP and SPOT imagery is provided by a seamless tile service that delivers image data at a predetermined resolution and quality. The raster and vector data, including grids and collar information, are processed using ESRI ArcGIS software and exported as a geospatial PDF using ESRI ArcGIS software. Map formatting is performed using a custom application, which includes post-processing to embed the metadata XML document and legend. The final GeoTIFF produced from the PDF is downsampled to 300 PPI, compressed, and zipped with an external metadata file. In addition, the projection of the GeoTIFFs are modified to accommodate a rotation of the maps so that the data frame is square to the page(the central meridian is shifted, modifying the projection from Universal Transverse Mercator to Transverse Mercator). All properties of the original PDF projection are retained. Any use of trade, product, or firm names in this publication is for descriptive purposes only and does not imply endorsement by the U.S. Government</procdesc>
        <procdate>20120604</procdate>
      </procstep>
    </lineage>
  </dataqual>
  <spdoinfo>
    <direct>Raster</direct>
  </spdoinfo>
  <spref>
    <horizsys>
      <planar>
        <mapproj>
          <mapprojn>Transverse Mercator</mapprojn>
          <transmer>
            <sfctrmer>0.9996</sfctrmer>
            <longcm>-71.5625</longcm>
            <latprjo>0.0</latprjo>
            <feast>500000</feast>
            <fnorth>0.0</fnorth>
          </transmer>
        </mapproj>
        <planci>
          <plance>coordinate pair</plance>
          <coordrep>
            <absres>2</absres>
            <ordres>2</ordres>
          </coordrep>
          <plandu>meters</plandu>
        </planci>
      </planar>
      <geodetic>
        <horizdn>North American Datum of 1983</horizdn>
        <ellips>Geodetic Reference System 80</ellips>
        <semiaxis>6378137</semiaxis>
        <denflat>298.2572221</denflat>
      </geodetic>
    </horizsys>
    <vertdef>
      <altsys>
        <altdatum>North American Vertical Datum of 1988</altdatum>
        <altres>3</altres>
        <altunits>meters</altunits>
        <altenc>Explicit elevation coordinate included with horizontal coordinates</altenc>
      </altsys>
    </vertdef>
  </spref>
  <eainfo>
    <overview>
      <eaover>This is a general-purpose design and layout quadrangle map based on the traditional USGS quadrangle cells. The domain is a standard 7.5-minute cell. The scale is 1:24,000.</eaover>
      <eadetcit>For general information on US Topo maps, refer to the National Geospatial Program US Topo Product Standard, 2011.</eadetcit>
    </overview>
  </eainfo>
  <metainfo>
    <metd>20120604</metd>
    <metc>
      <cntinfo>
        <cntorgp>
          <cntorg>U.S. Geological Survey, National Geospatial Technical Operations Center</cntorg>
          <cntper>Not Provided</cntper>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>1400 Independence Road</address>
          <city>Rolla</city>
          <state>MO</state>
          <postal>65401</postal>
        </cntaddr>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>Box 25046 Denver Federal Center</address>
          <city>Lakewood</city>
          <state>CO</state>
          <postal>80225</postal>
        </cntaddr>
        <cntvoice>1-888-ASK-USGS (1-888-275-8747)</cntvoice>
        <cntemail>http://www.usgs.gov/ask/</cntemail>
        <hours>Monday through Friday 8:00 AM to 4:00 PM</hours>
        <cntinst>Metadata information can also be obtained through online services using The National Map Viewer, at http://nationalmap.usgs.gov or EarthExplorer, at http://earthexplorer.usgs.gov or Ask USGS at http://www.usgs.gov/ask.</cntinst>
      </cntinfo>
    </metc>
    <metstdn>FGDC Content Standard for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
  </metainfo>
</metadata>
